Flashings roof

Flashings roof

Eaves flashing, corner profiles, U-profiles, omega or Z-profiles: for the perfection of roofs, SAB-profiel has its own setting shop, which can fall back on the same stock of materials in numerous thicknesses, coatings and colors as our products. More information about drip profile, corner profile, hat profile, U profile and Z profile can be found on flashings facades.

Flashings are available with a recommended maximum length of up to 6 meters and a recommended maximum width of up to 1,000 mm with a maximum material thickness of up to 1.5 mm; Lengths of more than 6 meters high and 1,000 mm thick only on request. With regard to transport and assembly, we recommend using flashings with a thin material thickness (0.63 and 0.75 mm) no longer than 6 meters. Coated flashings are supplied with a protective film, with the exception of Colorcoat HPS200 Ultra.

If required, flashings can also be custom-made. However, limitations are the base width of the material and the setting options of our machines. Below are some of the most common designs. Mail your design directly to sab.zetterij@tatasteeleurope.com or contact on +31 (0)30 6879 649 for an inquiry or order. You can also submit your request using our SAB flashing form NL.