Colorcoat SDP 50

Colorcoat^® SDP 50: The sustainable alternative to PVDF

Colorcoat SDP 50 is a high-build pre-painted steel product with a substrate of continuous galvanized steel and an organic coating with a layer thickness of 50 µm. Colorcoat SDP 50 is a high build prepainted steel product that provides and offers a sustainable alternative to PVDF with comparable aesthetic performance.

The advantages of Colorcoat SDP 50

Attractive, 50μm, lightweight textured coating that provides enhanced scratch and abrasion resistance combined with higher corrosion protection. Also available with rough texture and in matt finish
Galvanized substrate with zinc or MagiZinc^® metallic coating for very good corrosion resistance
Available in popular uni colors and RAL 9006 and 9007 metallic colours, all with excellent color and gloss retention
Matt colours also available (see separate Matt colour card), Black Matt already as standard at SAB
High-quality coating on underside, specially formulated for use in construction
Long life expectancy. Many good looking buildings of 20 years old and much older
Up to 25 years Tata Steel Performance Guarantee No registration needed
Fully covered during entire guarantee duration Including metallics
Achieving highest RC5+ certification according to EN 10169:2022
RUV4 certification according to EN 10169:2022
Low CO₂ footprint, a third Party verified EPD is available, IJmuiden supply is certified BES 6001 (responsible sourcing). Fully REACH compliant Available with Zeremis^®
Contemporary colour range including metallics with visible sparkle
20 years track record
Fire rating A1 for gauges > 0,42mm. Double sided also certified A1
Introduction Solar panels addendum (guarantee)

You can download a standard product performance guarantee of 25 years on a wall or roof application.

Colorcoat SDP 50 in many RAL colours available on stock, see below. All other RAL colours on request

Below you will find the colours and thicknesses SAB supplies as standard. Colours (and thicknesses) that SAB does not carry as standard are only supplied on request (with longer delivery time) and at an additional cost. Price levels vary by colour group, colour and thickness. Please check with SAB about this.

The colours shown differ from reality and serve as a guideline only. For an impression, you can look at the samples below or in the download of the SAB Colorcoat Overview NL. If in doubt about colour and gloss level, request a representative colour sample (of 15 by 7.5 cm) via the contact page.