SAB-profiel › Products › Roof › Roof decking › SAB 19KD/1050
English
SAB 19KD/1050
If you are working on an application for which heat insulation is not required, then SAB also has the right single skin roof decking profile or shallow deck roof for you. They are designed for mounting on inclined or round roofs.
SAB has a large range of single skin roof decking or shallow deck roofing. We have three types of sinusoidal roof claddings, the 18/988, 27/1000 and 42/960 next to several trapezoidal roof claddings from the 19KD/1050 till the highest cladding 58KD/945-s. The trapezoidal single skin roof decking profiles have broad valleys for a quick and easy drainage.
Anti-Condensation foil
Cold roof cladding (but also façade cladding and warm roof cladding) can be fitted on the inside with an anti-condensation foil to prevent the dripping down of condensation. Anti-condensation foil is especially intended for inside use. It is not suitable for use in humid rooms or in rooms with a permanently high humidity, where there is no ventilation and/or where the absorption surface cannot dry. Anti-condensation foil is also suitable for canopies exposed to (reduced) humidity. The light-grey anti-condensation membrane comprises fibres that clasp together, but which provide sufficient space to absorb condensation. When the temperature rises and there is ventilation, the moisture absorbed is released to the air. Apart from the good moisture-absorbing properties (500 to 900 gr/m²), the membrane also offers extra sound absorption. For headed overlap and ends above the drain (over a width of 200 mm), it is important that profile plates with anti-condensation foil on the building are finished with an air drier. The heating causes the membrane to deform, which prevents the sucking in of water from outside.
Specifications
Steel | |
mm | kg/m2 |
0,63 | 5,89 |
0,75 | 7,01 |
0,88 | 8,22 |
1,00 | 9,35 |
- Maximum length: 15,6 m
- Minimum length: 0,6 m
Popular colours Colorcoat HPS200 Ultra
(0,5 – 0,63 – 0,75 mm)