T +31 (0) 30 68 79 700 Produktieweg 2, 3401 MG IJSSELSTEIN

Tata Steel productielijn DVL3

Coils, flat sheet and flashings

Also for coils, flat sheet and flashings are you at SAB at the right address.

Coils

For the production of your own flashing it is advisable to use the same material as we use for the production of sandwich panels and profiled cladding. You can orer the flashing at SAB, but you can also buy a roll steel (Coil) in a coating and color chosen by you.

Flat sheet

SAB-profiel also has its own machinery for the production of flat sheet that allows us to supply flat sheet with a minimum length of two and a maximum length of six metres. The standard widths are 1.240 and 1.500 mm.

Flashings really provide the finishing touch to your projects

Parapet caps, sills and corners: for the perfect finish SAB-profiel has its own fabrication shop, which has access to the same stock of materials that we use for all our other products. In numerous thicknesses, coatings and colours.  

You can specify the form and dimensions of the flashing yourself. The only limitation is the width of the basic material and the technical limitations of our bending machine. Flashings are normally available in lengths of up to 6 metres, with a maximum width of 1.000 mm and maximum sheet thickness of 2 mm. Flashings longer than 6 metres of width above 1.000 mm on request. Below a number of popular shapes.

SAB Zetwerk voorbeelden  

Zetwerk klang

Parapet cap flashing with butt joint and butt strap

For all your questions

+31 (0) 30 68 79 700
or click here to contact us